3D Bowtie Tutorial

I learned from a magazine how to made a 3D Bowtie and really liked the process. Made during the Winter of 2006/2007, my 3D Bowtie quilt is a scrappy flannel family favorite, especially on a cold, long Winter evening. Here's a few pictures.

Hugs & Kisses (2007)

Today, I would like to show you how to make a 3D Bowtie.


You will need 2 pieces of fabric for the background and 3 for the bow tie itself. The bow can be made of one colour or two, it's up to you.

To make the tutorial easier to follow, my bow tie has two colours. The knot is be green. All the pieces have to be the same size.  (Now, that's easy to remember.)  In this example, my pieces are 3.5 inches. 

Fold the "knot" piece in half, wrong sides together,

and place on one of the background piece and cover with one tie piece. Keep the folded edge in the middle. 

I have misaligned the pieces only to show you how to stack them. You will then sew the left edge. NOT the top edge. 

The piece will then look like this when opened. 

Next, you do the same with the other side. Sandwich the knot piece in between the background and the tie fabric of the top part of the block. 

Again, misaligned to show the order of the fabrics.

Side view before sewing

Sew the side edge,  NOT the top.

side view after sewing 

top view

Lay the background and tie pieces flat and it should look like the picture above.

Open the bowtie and place it as if it was finished. The knot piece will twist in the middle and it should look like the above picture.

side view.

Now comes the time to pin all this. Open the knot piece so it is even on both sides of the middle seam. 

When I made my first 3D Bowtie quilt, I have learned a few lessons that I want to share with you. The first one is Pin, pin, pin! 

The second lesson is: do NOT sew the middle of the knot. Here's how to avoid this. 

This knot is not pinned properly. The crease is too close to the edge and might fall under the needle (above picture).

Here the knot fabric is more squared, keeping the crease away from the edge and the quarter-inch seam allowance. Perfect! (You have to pin the three layers together as in the picture below and not as this picture shows.)

The third lesson is more of a preference one. 

I sometimes find it is easier to align the side edges together if I pin the seams at the bottom too. (This is optional.)

You are now ready to sew across. It is thick and bumpy so sew with care. 

Open up and voilà! A perfect 3D bow tie. 

Here's a candle mat I made with 3D bowties.  And now you can too.

Enjoy!

;^)

Down Scrap Road

If you walk down to 2006 Scrap Road, you will see a scrappy 3D Bowtie I did for my DS1 awhile back, (in 2006).  It's called "X n O's"  because it couldn't be called Hugs and Kisses.  (Apparently, you can't say that to a teenager.  Well, at least to no boys of mine. I was told LOL. )

(I apologize for the sideway picture.  Does someone know how to rectify this? I would like to know, ty.)
It is all flannel, top, middle and back.  He was always cold back then and wanted something "very, VEEEERRRY warm".  So I did it VEEEERRRY warm ... and heavy! It's a collection of severals remnants from the boys' pajamas except for the sashing and the back which were bought. It also sports a pink block to represent Mom.

From this angle you can see that some bowties are 3D and some aren't. I hand quilted it with all kinds of fun design.

Some tools for the trucks and cars block ...

some bugs all around the spider web block and a huge spider in the middle of course...

Uncle B's sailboat and so on.   

Here's one for the cat lovers out there. It is almost 8 years old and it is already faded and has some 3D bowtie damaged but that's ok with me. It tells me how much he loves it ... still. 



Hope you've enjoy the walk down Scrap Road.

Until next time .... 

 ;^)  Smile ... someone might be looking.